Free Phone: 0800 485 990 (NZ)

The PAM420 is specifically designed for measurements onelectrical power systems. It is capable of displaying phase angle,voltage, current, frequency and timing.The phase angle is calculated from the relationship between twopower signals, which can be two currents, two voltages or anycombination.Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

The PAM420 is specifically designed for measurements on electrical power systems. It is capable of displaying phase angle, voltage, current, frequency and timing.

The phase angle is calculated from the relationship between two power signals, which can be two currents, two voltages or any combination.

Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

The PAM420 is suited for checking polyphase metering installations, testing protective relays, make comparative test in electrical substations, and verifying the phase angle deviation on power transformers.

Features and benefits

  • Direct digital reading to tenths of a degree does not require calculation or interpretation.
  • Designed for use in substation or industrial environments transport case provided for rugged protection.
  • Phase angle calculated from of any combination of two power signals to be measured giving broad application capability.
  • Timer with high accuracy for contact or voltage trig.
  • Local calibration.

pdf-iconData Sheet