![[PM7000] Power Quality Analyser](/images/pm7000-th.jpg)
PM7000 |
![[PM4000] Power Quality Analyser](/images/PM4000-th.png)
PM4000 |
![[PM3000] Power Quality Analyser](/images/PM3000-th.jpg)
PM3000 |
![[PM1000] Power Quality Analyser](/images/PM1000-th.jpg)
PM1000 |
|
|
No. Voltage Channels |
4 | 4 | 3 | 1 |
|
Voltage Range AC |
0-600Vrms or 0-1000Vrms (L-L and L-N). 0-848Vpk or 0-1414Vpk Transient voltages up to 4000V | 0-600Vrms or 0-1000Vrms (L-L and L-N). 0-848Vpk or 0-1414Vpk Transient voltages up to 4000V | 0-480Vrms or 0-600Vrms 0-678Vpk or 0-848Vpk | 0-270 Vrms 0-381Vpk |
|
Voltage Range DC |
0-480Vdc | |||
|
No. Current Channels |
4 | 4 | 3 | 1 |
|
Current Range AC |
0-400.0A or 0-6000A | 0-400.0A or 0-6000A | 0-50.00A, 0-400.0A or 0-3000A | 0-50.00A or 0-1000A |
|
Current Range DC |
Variable with relevant current clamps | |||
|
Ability to Measure Neutral |
✓ | ✓ | ✓ | ✓ |
|
Differential Voltage Channels |
✓ | ✓ | ✓ | |
|
Detailed Recording Channels |
32 | 32 | 16 | 16 |
|
General Parameters |
✓ | |||
|
DC Measurement |
Optional | |||
|
Fault Level |
Optional | |||
|
Flicker (Plt, Pst, Pinst, Pflag) |
✓ | ✓ | ✓ | ✓ |
|
Highest order of individual harmonics |
50th (127th Optional) | 50th (127th Optional) | 15th | 15th |
|
Interharmonics |
Optional | |||
|
THD and THC |
✓ | ✓ | ✓ | ✓ |
|
kW |
✓ | ✓ | ✓ | ✓ |
|
KVA |
✓ | ✓ | ✓ | ✓ |
|
KVAR |
✓ | ✓ | ✓ | ✓ |
|
Power Factor |
✓ | ✓ | ✓ | ✓ |
|
Unbalance (V & I) |
✓ | ✓ | ✓ | ✓ |
|
Frequency 45-65Hz (Can automatically detect 50 or 60Hz nominal) |
✓ | ✓ | ✓ | ✓ |
|
InRush Current |
✓ | ✓ | ✓ | ✓ |
|
K Factor |
✓ | ✓ | ||
|
Symmetrical Components |
✓ | ✓ | ✓ | |
|
Single Cycle Adaptive Store |
✓ | ✓ | ✓ | ✓ |
|
Data logging time interval single cycle to 12hrs or Auto-variable with Adaptive Store |
✓ | ✓ | ✓ | ✓ |
|
Sag / Swell / Outage Monitoring |
✓ | ✓ | ✓ | ✓ |
|
High Speed Waveforms with AutoRanking Waveform Capture |
Yes at 19.2k, 153.6k, 1.2M Samples/sec | Yes at 19.2k Samples/sec | ||
|
Transient detection |
Yes both cycle & sub cycle | Yes both cycle & sub cycle | Yes down to single cycle | Yes down to single cycle |
|
CBEMA / ANSI / ITIC curve plots |
✓ | ✓ | ||
|
Onboard Display |
✓ | |||
|
Live Results |
Using PMMeter PMWave or PMScreen | Using PMMeter PMWave or PMScreen | Using PMMeter PMWave or PMScreen | Using PMMeter or PMScreen |
|
Bluetooth |
✓ | ✓ | ✓ | ✓ |
|
Ethernet |
Optional | |||
|
USB or Infra-Red Communication |
USB | USB | USB | USB-C |
|
Remote screen with PMScreen |
✓ | ✓ | ✓ | ✓ |
|
Remote Communications via PMGateway |
✓ | ✓ | ✓ | ✓ |
|
Time Synchronisation over mobile phone or PC |
✓ | ✓ | ||
|
Memory storage for recorded data |
128MB | 32MB | 8MB (16MB & 32MB Optional) | 8MB (16MB & 32MB Optional) |
|
Expandable Memory with a memory Stick or Hard Drive |
✓ | ✓ | ||
|
Fifo mode |
✓ | ✓ | ✓ | ✓ |
|
Self Powered (powered from Phase A) |
✓ | ✓ | ✓ | ✓ |
|
Can be charged from the mains if necessary (12V DC charger unless otherwise specified) |
✓ | ✓ | ✓ | Power Lead |
|
Portable/Fixed |
P | P | P | P |
|
Operating Temperature |
-20 to 60°C | -20 to 60°C | -10 to 60°C | -10 to 60°C |
|
Safety Rating |
600V CatIV, 1000V Cat III (Fuses removed) | 600V CatIV, 1000V Cat III (Fuses removed) | 600V Cat III | 300V Cat III |
|
IP Rating |
IP65 | IP65 | IP51 | IP40 |
|
Software |
Pronto for Windows | Pronto for Windows | Pronto for Windows | Pronto for Windows |
