• The BigFoot™ Cable Cutter is designed to cut 750 KCMIL (MCM) and smaller hard-drawn copper and aluminum cables 
• Molded-in foot provides stability and leverage when making multiple cuts 
• Hardened steel blades ensure consistent cuts and long-term durability 
• Rounded blade design minimizes cable distortion during cutting 
• Quick release mechanism simplifies blade back-out 
• Locking mechanism keeps handles closed for easy storage

• Cuts hard drawn copper up to 400 KCMIL (MCM) and soft copper, aluminum and multiple conductor cable up to 600 KCMIL (MCM) 
• Hardened steel blades ensure consistent cuts and long-term durability 
• Rounded blade design minimizes cable distortion during cutting 
• Quick release mechanism simplifies blade back out 
• Locking mechanism keeps handles closed for easy storage 

This ratcheting cable cutter will cut hard drawn copper up to 400 MCM and soft copper, aluminum, multiple conductor cable cuts of up to 600 MCM. It features a durable hardened steel rounded blade construction to ensure consistent cuts and minimizes cable distortion. Cutter has dual durometer covered, ergonomic, non-slip handle grips and a locking mechanism for easy storage. It has ratcheting jaw with maximum jaw opening of 1.375 inches.

• Two position slip joints fit large and small jobs
• Dipped comfort-grip handles for a secure grip
• Flush rivet

Slip-Joint Pliers are perfect for quick installation and removal of spring-tension hose clamps. These pliers grip with either end or side of jaws, and feature a flush rivet making them perfect for working in confined areas.

• Use Wood Chisel by hand or mallet 
• Hardened and tempered for long life 

Wood Chisel is made of extra-long, high-grade tempered steel and is ideal for use on soft wood, hard wood, and laminated wood products. The acetate handle features a steel end cap for use with wooden and polyester mallets. Reinforced steel caps for use with chisel mallets.

• 9 in. aluminum frame with magnetic and V-grooved edges 
• Windows provide easy reading of plumb level and 45° miter in dim lighting 
• Three rare earth magnets for strong cling to conduit 

The durable molded plastic frame and covers of the 9 in. torpedo level withstand high impact to offer long-lasting use. The level's large top-reading vial is easy to read, it’s windows provide easy reading of plumb level and 45° miter in dim lighting, and its V-groove is ideal for use in conduit and pipe work. The level has a magnetic edge that holds securely to ferrous metal surfaces.

• Levels feature an integral Thumb Winder™ conduit wheel with a contoured screw designed for non-slip grip and stability that prevents doglegs in complex conduit bends 
• Entire chassis is CNC machined from 6061 T6 aluminum billet for straightness 
• Corrosion resistant brass screw for easy vial replacement instead of plastic or glued caps 
• Oversized neodynium rare earth magnets provide the highest magnetic field strength and stability 

• One-piece drop-forged, tempered-steel polished head and handle 
• Long, straight claws simplify removal of electrical fixtures
• Comfortable, perforated anti-vibe grips 

This is a professional quality hammer designed specifically for the electrical professional; the head and shaft are forged as a single piece of tempered-steel. Long straight claws simplify the removal of electrical fixtures and elongated neck for inside boxes. Effective handle design of leather washers over the steel shaft is safe, comfortable and cushioned.

• Cushioned ergonomic grip for performance and comfort
• Rugged frame provides lightweight rigidity and exceptional control
• Includes 12 in. x 24T bi-metal blade, stores up to nine extra blades
• Blades can be adjusted to 55° angle for flush cutting and tensioned to 30,000 psi

The dual purpose hacksaw measures 16 in. length and is constructed from Bi-metal material for long lasting durability, strength and flexibility. Standard, jab/hacksaw includes 12 in. x 24 TPI bi-metal blade that can be adjusted to 55° angle for easy flush cutting. Rugged frame allows lightweight rigidity and exceptional control when in use. It is designed such that it stores up to nine extra blades for user convenience and can also be used as conventional hacksaw or as jab saw to enlarge holes.

• Angled handle for easier cutting 
• Blade can easily be adjusted for flush cutting
• Easy tensioning wing-nut keeps blades tight for straighter cuts 
• Cushioned ergonomic grip for performance and comfort

The ergonomic hacksaw is constructed from Bi-metal material for long lasting durability, strength and flexibility. Hacksaw includes 12 in. x 24 TPI bi-metal blade that can be adjusted for easy flush cutting. Angled handle and cushioned ergonomic grip provides easy cutting, maximum performance and superior comfort. Its easy tensioning wing-nut keeps blades tight for straighter cuts.

• Light-weight, heavy-duty die cast construction 
• Ergonomic rubber comfort grip
• Blade safely and conveniently folds down in handle 
• Accepts most standard 6 in. recip blades

• Ergonomic, textured non-slip grip with plunge-tip design 
• Ergonomic, textured non-slip grip with plunge-tip design 
• Weighted head provides superior balance 

The Electrician's jab saw features replacement cutting bi-metal blade of length 12.25 in. for the wallboard. Ergonomic handle provides comfortable grip and safety. It holds all reciprocating blades and hacksaw blade type teeth.

• Quick-change retractable blade system — no disassembly required 
• Built in pull-line cutter 
• Includes three blades in storage compartment 

The IDEAL Utility knife in yellow color has built in pull-line cutter with a soft, non-slip comfort grip. Quick-change retractable blade system features slide out blade storage compartment comprising of three double-ended blade. Convenient front blade loading eliminates the need to disassemble knife. Knife of size 1.00 in. x 4.25 in. x 10.00 in. features cushioned blade-slide that provides smooth movement into eight blade positions.