Free Phone: 0800 485 990 (NZ)

Volt Sticks

Ideal Volt Aware Non-Contact Voltage Tester

  • Indicates presence of voltage from 40-1000VAC
  • Visual indication of voltage
  • Selectable audible indication of voltage
  • Sleek, compact design
  • Auto shut-off to conserve battery life
  • Green LED shows unit is active, flashing red indicates live voltage
  • Low battery detector
  • Easy battery replacement
  • Batteries included (2 AAA)
  • 2-year warranty

Ideal Single Range 24 to 600V AC NCVT with Flashlight

The IDEAL 61-637 is CAT IV 600 V AC, UL Listed, Single Range Non-Contact Voltage Tester that automatically detects and indicates the presence of voltage within range of range of 24 - 600V AC . The tester provides non-contact detection of voltage through an antenna enclosed in plastic at the tip of the tester which senses the presence of the electromagnetic field present around live conductors. The tip is illuminated by a green LED when powered on and switches to a red flashing LED, and audible beep that increase in frequency as the voltage level increases. The tester is powered by two 1.5V AAA batteries and features an in tip LED flash light, an audible disable function, a lanyard tie-off point, an auto power off function and a low battery indication.

Megger VF3

AC Voltage Detector

The Megger VF3 Voltage detector is a compact pen-style instrument to identify the presence of live AC voltages from 90 V to 600 V at 50 or 60 Hz. Voltage is capacitively detected, signalled on the VF3 by the illumination of a bright red LED situated within the white nylon tip. The VF3 has the additional feature of an audible warning device actuated simultaneously to the red LED.

APPA VP2

Combined Voltage Detector and Phase Rotation Indicator

The APPA VP-2 combines a high functioning volt stick with a RED/GREEN phase rotation indication. The voltstick flashes more quickly the stronger the voltage signal, simplifying live voltage identification in a crowded circuit board or cable run.

APPA IT-1

Pocket thermometer, voltage detector and torch

  • Large LCD temperature display
  • Accurate to ±1°C
  • Easy °C / °F unit switching
  • Distance to Spot Ratio 8:1
  • Contactless AC voltage detector with LCD indication
  • Bright white LED Torch
  • Small: 20 mm (W) x 100 mm (L) x 29 mm (D)
  • Single AAA size battery with low battery indication

AVO LVD-15

Non contact voltage detector 50

The LVD-15 non-contact Voltage Detector is intended to check for the presence of AC voltage, signaling the user with an
intermittent tone and a flashing LED. The non-contact Voltage Detector is used to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wire.