Free Phone: 0800 485 990 (NZ)

Digital Multimeters

Multimeter Accessories ...

AVO boasts arguably the leading and most comprehensive range of multimeters on the NZ market. We have a high quality meter selection for all Industry Groups.

Chose from the following categories that best fit your need then ask us today for a demonstration!


Residential Electrician


Residential Electrician lge

Faultman/Network Contractor

Faultman Network Contractor lge

Industrial Electrician/Inspector

Industrial Electrician Inspector

 

DMM Selection Chart May19

DER EE DE-243

Digital Multimeter

  • True RMS
  • Auto power off selection
  • Auto and manual range
  • Relative mode
  • Data hold function
  • Frequency up to 5MHz and duty cycle
  • Temperature measurement
  • Over range protection
  • Backlight - blue

APPA P3

General Purpose, Full Featured Digital Multimeter

The APPA P3 digital multimeter is the professional technicians true companion, suitable for almost every application and forms the base for any electrical test tool kit. The APPA P3 is the bona fide workhorse meter and updates the hugely popular APPA77. Comprehensive features ensure virtually all typical daily requirements are covered with the utmost accuracy, reliability and safety.

APPA S2

Professional HVAC Digital Multimeter

  • True RMS
  • Temperature
  • AC/DC µA
  • Non-contact voltage detection
  • Built in magnetic holder

 

APPA S3

Solar PV Multimeter

  • 2000VDC measurement for Photovoltaic output
  • PV Test Leads
  • Bluetooth connection with APPA connect APP
  • CATIV 600V Safety Rating

APPA 99IV

Industrial Multimeter

  • True RMS reading on AC and AC+DC mode
  • Rapid zeroing on AC V/A mode
  • High Frequency Rejection
  • High accuracy/stability on resistance mode
  • Separate AC, DC voltage measurement mode for high accuracy measurements

APPA607

Combined Insulation Tester and Multimeter

  • 10,000 extra large digital display
  • 48 segments analog bar graph
  • Auto Backlit, Dual display
  • Auto AC/DC Voltage Detection
  • AC/DC 1000V capability
  • Min Max AVG features
  • Store/Recall memories
  • Resistance capability up to 40M Ω
  • Insulation test range up to 22G Ω
  • Insulation test voltage: 50V, 100V, 250V, 500V, 1000V
  • Auto Power Off to save battery life
  • Included with Remote test probe, test leads, alligator clips and magnetic hanging kit.
  • CAT. IV 600V/CAT. III 1000V standard

APPA 507

Advanced Process Control Digital Multimeter

By coupling a loop calibrator with the power of a digital multimeter unrivalled efficiencies can now be achieved during installation and testing. By way of combining a high specification DMM, 4-20mA Loop Calibrator, and analogue HART protocol capability in one device, the new APPA 507 model from AVO NZ reduces the number of instruments required on-site. It also reduces the time you spend trouble shooting by quickly identifying separate issues between the instrumentation and the controls on the PLC side.

APPA 505

Highest Specification, Highest Performance, Highest Accuracy

The APPA 505 is the go to meter when absolute precision and accuracy is required. Packed full of features and with an impressive 100,000 count display its ideal for the industrial technician or inspector.

APPA 506B

High Specification Digital Multimeter with Bluetooth

The new APPA 506B combines a high specification digital multimeter with smart phone and tablet connection through its Bluetooth functionality.

CEM DT-9989

Professional, Industrial – Multimeter/Oscilloscope

DT-9989 Professional True RMS Industrial Digital Multimeter with oscilloscope functions and TFT colour LCD display

AVO835

Industrial Multimeter

Specifically designed for the electrical engineer and profession electrician, this range of tough, high quality multimeters offers the perfects election of functions required. Useful innovations such as the high and low impedance switching allow a quick and safe method to identify capacitive coupled, ghost, voltage. The introduction of the dual sensitivity non-contact voltage detector helps you identify a live circuit at a distance and then to pinpoint the exact conductor or circuit.

DER EE DE5000

LCR Meter

  • L (inductance), C (capacitor), R (resistance)
  • Auto L/C/R check
  • 100 / 120 / 1K / 10K / 100K Hz test frequency
  • 20,000 / 2,000 counts display
  • Backlight
  • Ls/ Lp/ Cs/ Cp/ Rs/ Rp/ DCR with D/Q/θ/ESR measurement
  • Relative mode
  • Series / Parallel modes
  • Components sorting function
  • *Selectable tolerance ±0.25%、±0.5%、±1%、±2%、±5%、±10% ±20%、-20%+80%
  • Low battery indication
  • 4-wire Kelvin measurement

APPA 208B

Bench Top Digital Multimeter

Designed for laboratory and bench service work. The APPA208B also adds smart device connectivity through its Bluetooth features which makes data logging of up to 40,000 records seamless and pain free.

Ideal 1000V AC/DC Multimeter with Bar Graph

1000V Auto Range TRMS 6000 Count Display Multimeter with NCVT, Temp & LoZ

The IDEAL 61-357 Digital Multi Meter is a CAT IV 600 CAT III 1000V rated auto ranging true root mean square (TRMS) digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load. It measures up to 1000V AC and DC, LoZ (low impedance) AC V, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (⁰F/⁰C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the top center of the meter. It's display features a digital readout and also an analog bargraph representation and can be backlit.

Ideal 1000V AC/DC Multimeter

1000V Auto Range TRMS 6000 Count Display Multimeter  with NCVT & Temp

The IDEAL 61-347 Digital Multi Meter is a CAT IV 600 CAT III 1000V rated auto ranging true root mean square (TRMS) digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load. It measures up to 1000V AC and DC, LoZ (low impedance) AC V, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (⁰F/⁰C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the top center of the meter.

Megger AVO410

TRMS Electricians' Multimeter

The Megger AVO®410 digital multimeter designed for the contracting electrician has the additional features that also make the instrument suitable for wide range of applications and users.

Ideal 600V Auto Range Multimeter w/NCVT & Temp

  • UL Certified CAT III 600V AC/DC 10A AC/DC TRMS Auto Ranging Digital Multimeter
  • Measures AC/DC Current, AC/DC Voltage, frequency, resistance, continuity, capacitance, diodes, temperature and senses AC voltage
  • LEAD Position Warning and Open FUSE indication
  • Built-in probe tip holders and hanging strap clip allows safer, easier measurement (Hanging Strap sold separately)
  • Backlit display, allows for safer/faster work in poorly lit environments
  • Includes soft case, test leads, batteries, and K-Type Thermocouple

Ideal Test-Pro Digital Multimeter

  • Voltage
  • Current
  • Resistance
  • Audible continuity
  • Capacitance
  • Frequency
  • Temperature
  • Data hold
  • Min/max/relative modes
  • Backlight
  • Low battery indication
  • Auto power off
  • Limited 2-year warranty

Ideal Test-Pro Digital Multimeter w/TRMS

  • Voltage
  • Current
  • Resistance
  • Audible continuity
  • Capacitance
  • Frequency
  • Temperature
  • Data hold
  • Min/max/relative modes
  • Backlight
  • Low battery indication
  • Auto power off
  • Limited 2-year warranty