Vibration diagnostics is a major part of predictive machine maintenance programs. Vibration diagnostics has over the years proven to be the most effective method for checking “machinery health“.
Running machines generate vibrations, which contain a lot of information about their condition. A vibration meter or analyzer is used to measure this vibration. The sensor needs to be mounted on an appropriate point on the machine (e.g. bearing housing). The instrument measures the vibration signal, tells you the severity of the vibrations and also possible machine fault. The most frequent faults are bearings faults, unbalance, misalignment and looseness.
With Adash Devices you can ...
determine the condition of the machine according to ISO standards
The A4300 VA3 Pro offers an array of modularly based vibration diagnostics features all packaged in robust portable unit. Its user friendly interface and FASIT mode mean it is a favoured model in most factories with critical machinery/ motors.
The A4500 - VA5 Pro is the first instrument on the market, which combines vibration analysis, thermal imaging and ultrasound detection. It is a leading device for performing measurements in the field of machinery vibration analysis. The ultimate (CATIV) Vibration Analyst’s diagnostic tool.
The A4950 stroboscope uses three ultrabright LEDs with optical system as a source of fl ashes. The device is equipped with a colour graphic display and 3 operational buttons. Operation is very easy and intuitive. Two standard or rechargeable AA batteries are used for powering. The A4950 stroboscope can be used also as a tachometer by connecting an external speed probe.
The A4910 Lubri is a maintenance tool used for monitoring and control of the lubrication process. The A4910 Lubri measures the actual bearing lubrication status and informs the operator when the lubrication state is optimal.
Application of the A4910 Lubri extends the bearing lifetime and saves lubricants.
The A4910 Lubri is simple to operate and also enables you to perform basic measurements and diagnoses of bearing condition.
A wide range of acceleration sensors. Single axis sensors are available with most common 100 mV/g sensitivity and 10, 50, 500 mV/g sensitivity. Triaxial acceleration sensor compatible with VA3Pro, VA4Pro, VA5Pro and A4404 available too.